Jeremiah wrote:I don't think it would explode, maybe it might crack. The safest heating method I've found is using an old-fashioned incandescent bulb in a department store brooder lamp. It's much cheaper than the ceramic heat emitters. My mother used to use one for her box turtle, but she switched to incandescents as well due to the short lifetime of the emitters.
Jeremiah wrote:You'd be surprised. My 60 watt keeps a 90F basking spot from over a foot away. Unless you mean that you originally wanted the heat emitter to heat the water...?
Jeremiah wrote:I still recommend the incandescents. There are lots of people who will provide you with a good testimonial for them!
Jeremiah wrote:I like to use Sylvania. Honestly, though, any brand from your local home improvement store will work. Just keep in mind that manufacturers make a lot of LED bulbs that only look like incandescents, but don't provide heat. Be sure to read the labels extra-carefully.

steve wrote:Heat emitters are expensive and you won't know when it stops. I've found that they are fragile too, not lasting for more than a few months. You also will have to rely on a CFL as the main light source, and I don't think turtles don't like that arrangement.
I've been using PAR30L halogens for years. The lamp fixture is also very important, if not even more so. How big are your turtles?

steve wrote:Turtle Topper is a bit small for an adult RES. If the tank is <55 gallons, then it will need to be modified a bit.
I use something similar to this: http://www.homedepot.com/p/Philips-EcoV ... /203231698
There's also this: http://www.amazon.com/Zoo-Med-Repti-Spl ... B000KHBT12 BUT I think those are just re-branded.

steve wrote:You will need to monitor the temperature and adjust the distance accordingly.
Users browsing this forum: No registered users and 19 guests